Baker Hughes Waygate Technologies CL 5, Operating Manual

Page: 42 / 89

4-42 CL 5
4.4 Quality View Mode
This view mode displays the current measurement
location name, a measurement bar graphic of the
thickness reading that shows the lower specified limit
value, the nominal/target value and the upper
specified limit. Below the measurement bar graphic is
the numerical thickness measurement reading.
Fig 4.4.2 Numerical Value of Thickness is filled when probe is coupled to the location for
measurement
Measuring Thickness
Quality View Mode
When coupled to a part, the thickness value is dis-
played. The measurement bar graphic shows where
the thickness value is in the range, in relation to the
lower and upper specified limits.
The probe can be coupled to the next location. The
thickness value and measurement bar are updated
with the new thickness measurement value.
If the thickness is within the specification range the
user can press SEND to capture the thickness value
in the data recorder (when activated). Note: The
location of the data recorder point is shown in the
upper left of the display. After pressing SEND, the
thickness value is saved.
Fig 4.4.1: Selection of Quality View Mode and Quality View Mode Display