Baker Hughes Waygate Technologies CL 5, Operating Manual

Page: 30 / 89

3-30 CL 5
Creating and Erasing Custom Setup Files
Setting Up the CL 5
alarm is violated. Note that the inputted alarm value
will correspond to a thickness except when the VELO-
CITY measurement option is installed and activated.
In this case the alarm settings will represent velocity
values. To input a minimum or maximum alarm:
Step 1: Press to access the Configuration display
(shown in Figure 3-3).
Step 2: Press or to select
MINIMUM ALARM or MAXIMUM ALARM
Step 3: When the desired parameter is highlighted,
press to activate it.
Step 4: Press or to change the selected posi-
tion in the alarm thickness and or to adjust the
value of the selected position. To switch the alarm
setting to OFF from any other value, simultaneously
press an .
Step 5: Press when the alarm thickness is set to
the desired value.
3.5 Creating and Erasing
Custom Setup Files
After loading a Standard Setup and performing the
necessary adjustments to optimize performance for
a given application, the instrument settings can be
stored and named as a Custom Setup file. The instru-
ment is capable of storing up to 5 Custom Setup files,
which can be erased at any time
(Figure 3-5).
Custom Setups can be created from any CL 5 key-
pad. Custom Setups created using a base-model
instrument include the following settings:
• User-assigned Custom Setup file name
• VELOCITY
• MINIMUM ALARM
• MAXIMUM ALARM