Baker Hughes Waygate Technologies CL 5, Operating Manual

Page: 32 / 89

3-32 CL 5
Locking and Unlocking Instrument Controls
Setting Up the CL 5
Custom Setups created using instruments equip-
ped with an optional A-Scan display store the same
parameters as a base-model unit as well as settings
that affect measurement. A full listing of parameter
settings stored in Custom Setup files is found in
Table 3-1.
Whenever a Standard or Custom Setup file is recalled,
all of the instrument settings revert to those settings
stored in the file. Note that thickness measurements
are part of Data Recorder files (see Chapter 5) and
are not stored in Setup files.

Note:
UltraMATE can be used to transfer Custom Setup files
to a PC where they are stored. The stored Setup file
can then be downloaded to any CL 5.
Table 3-1
CUSTOM SETUP FILE CONTENTS
Custom Setup File Name
Nominal Thickness—when differential, %RR, or Velocity
mode is selected
Velocity Minimum Alarm Thickness
Gain Maximum Alarm Thickness
Resolution of Displayed Values Zero Offset
View Mode