Baker Hughes Waygate Technologies CL 5, Operating Manual

Page: 18 / 89

2-18 CL 5
2.3 Working with the
Configuration Display
The Configuration display is accessed by pressing
With this screen displayed, you can adjust most CL 5
controls.
VIEW MODE
– In base-model units this parameter
offers 4 settings. In A-Scan equipped instruments
this parameter allows the measurement and live
A-Scan to be displayed. In Data Recorder equipped
instruments, Quality View is available See Section 4.1
to select the view to be displayed.
DATA RECORDER
– When the optional data recorder
is installed, setting this parameter to ON activates the
file recording capability and the data recorder file
display.
MINIMUM ALARM
– Enables and sets the minimum
alarm value. (Section 3.4)
MAXIMUM ALARM
– Enables and sets the maximum
alarm value. (Section 3.4)
NOMINAL THICKNESS
– Set the nominal thickness
value that is then used to calculate and the differen-
tial and rate of reduction measurement values when
selected by the VIEW MODE parameter.
(Section 3.2.3)
RESOLUTION
– Controls the format (number of deci-
mal places) of the thickness measurement displayed,
printed in a report, and stored in a Data Recorder file.
(Section 3.2)
UPDATE RATE
– Rate at which the measurement
reading is updated. (Section 3.2.2)
BACKLIGHT
– Turns the display’s backlight feature
to ON, OFF, or AUTO (AUTO switches backlighting on
whenever a key is pressed or the probe is coupled)
CONTRAST
– Sets the display’s contrast level (select
then press or to change contrast)
LANGUAGE
– Sets the instrument display’s language
(Section 3.2)
UNITS
– Sets the unit of measurement to inches or
millimeters (Section 3.2)
Understanding the Keypad, Menu System, and Displays
Working with the Configuration Display Module