Baker Hughes Waygate Technologies CL 5, Operating Manual

Page: 54 / 89

5-54 CL 5

Note:
Pressing below SEND with the instrument connected
to a PC that has the applicable software installed and
running will result in the thickness reading being sent
out the I/O port as described in Section 6.1.
5.3.1 Recording A-Scans in Data
Recorder Files
A live A-Scan can be stored in that active position of
the Data Recorder by pressing and holding (for
three seconds) below SEND.

Note:
A-Scan Attachments cannot be stored in Quality View
Mode
5.3.2 Navigating Through Data
Recorder Files
When the Data Recorder is turned on, the contents of
the active Data Recorder file are displayed in the
File Navigation Grid shown in Figure 5-2. Once the
navigation grid is activated, , , , and can be
used to select any file position. Note that a heavier
grid box appears around the selected file position.
Once a file position is selected:
• The current thickness reading can be sent to an
EMPTY file position
• A measurement value can be store by pressing
below SEND
• An already stored value can be deleted by pres-
sing below CLEAR
Printing a Report
Using the Optional Data Recorder