Baileigh STS-14120DRO, Operator'S Manual

Page: 34 / 116

30
30
Rip Fence Adjustment
After the rip fence is moved, if the moving size and the
target size have slight difference, the following is the
operating way of the micro-knob:
Pull the handle (A) upwards and move the rip fence 1.
to near the target size.
Loosen knob (B). 2.
Turn the micro-knob (C) to the target size. 3.
Turn the micro-knob clockwise: - direction 4.
movement.
Turn the micro-knob counter-clockwise: + direction 5.
movement.
To fasten the rip fence, do above steps in reverse 6.
order.
To change the aluminum fence, loosen the handle 7.
(D).

Above left drawing is the position of aluminum fence at 90 degree cutting.

Above right drawing is the position of aluminum fence at cutting angle.