Baileigh STS-14120DRO, Operator'S Manual

Page: 77 / 116

73
73
Lubrication
The table saw has sealed lubricated bearings in the motor housing and the arbor assembly, they
will not require any additional lubrication. Use a wire brush to clean off the worm gears and
trunnions and apply a white lithium grease to keep them lubricated.
It is essential to clean components before lubricating them because dust and chips build up on
lubricated components and make them hard to move. Simply adding more grease to them will
not yield smooth moving components.
ISO DIS-3498 Lubricating Cycle Lubricating Way
XM2 6 months Lubricate the machine
BRAND
MOBIL ESSO SHELL
MOBILUX 2 BEACON 2 ALVANIA R2
Sliding Table Maintainance

Clean the contact surface (A) of upper slide base and
lower slide base.

Clean the contact surface (B) of lower slide base and
the roller.

Periodically clean above contact surfaces to keep
long-term accuracy of machine.
Angle Slide Rail Maintenance

Clean dust or wood chips on slide rail.

After cleaning, apply the lubricating oil. Please refer to
the following list to choose the lubricating oil.

Periodically maintain above contact surfaces to keep
long-term accuracy of machine.
A
B