53
32-5/8
x 48"
3
4
6
Nail the roof panel using 2" nails 6" apart
on edges and 12" apart inside panel.
PARTS REQUIRED:
ROOF PANELS
6"
(15,2 cm)
6"
(15,2 cm)
12"
(30,5 cm)
12"
(30,5 cm)
27-1/4"
x 48"
27-1/4"
x 48"
Place the
27-1/4" x 48"
roof panel as shown with the rough side up. Use a gauge block to ensure the panel
measures 3/4" (1,9 cm) along the length of the rafter
(Fig. C)
Panel should be flush with end of rafter
(Fig. B)
and flush along edge of installed panel.
Secure with 2" nails 6" apart on edge and 12" apart inside panel.
Place the
32-5/8" x 48"
roof panel as shown with the rough side up. Use a gauge block to ensure the panel
measures 3/4" (1,9 cm) along the length of the rafter
(Fig. C)
Panel should be flush with end of rafter
(Fig. B)
and
flush along edge of installed panel. Move and adjust gable unit and truss to make flush with
32-5/8" x 48"
roof
panel.
Secure with 2" nails 6" apart on edge and 12" apart inside panel.
Place another
27-1/4" x 48"
roof panel as shown with
the rough side up. Use a gauge block to ensure the
panel measures 3/4" (1,9 cm) along the length of the
rafter
.
Panel should be flush with end of rafter
(Fig. B)
and flush along edge of installed panel.
Secure with 2" nails 6" apart on edge and 12" apart
inside panel.
5
Flush
at rafter end.
Fig. B
3/4"
(1,9 cm)
Gauge
Block
Gauge
Block
Fig. C
Flush
Flush
Flush
Flush
Flush
Flush
Flush
Flush