52
Roof panels may cause serious injury until securely fastened.
1
BEGIN
2" (5,1 cm)
PARTS REQUIRED:
ROOF PANELS
7/16 x 32-5/8 x 48"
(1,1 x 82,9 x 121,9 cm)
x2
x234
3/4" GAUGE
BLOCK
7/16 x 27-1/4 x 48"
(1,1 x 69,2 x 121,9 cm)
x2
3/4"
(1,9 cm)
Gauge
Block
Fig. A
Fig. C
Flush
at rafter end.
Fig. B
Flush
at rafter end.
Fig. B
Two Nails
Two Nails
Move to the outside edge. Using the long edge of the panel as a lever move the panel side-to-side until
the outside long edge is flush with the outer gable frame
(Fig B)
.
Secure with two 2" nails.
You may need to move your truss and gable
frame unit to make panel flush with outer
gable frame (Fig. C).
2
You must square the roof by attaching one
32-5/8 x 48"
panel at this time.
You will use the panel's long edge as a lever to bring your roof into square.
Place the
32-5/8 x 48"
roof panel as shown with the rough side up. Use a
gauge block to ensure the panel measures 3/4" (1,9 cm) along the length of
the rafter
(Fig. A)
. Panel should be flush with end of rafter
(Fig. B)
.
Secure with two 2" nails.
Flush
Flush
32-5/8"
x
48"