KKA
x1
2 x 6 x 81" (5,1 x 15,2 x 205,7 cm)
62
HINT:
Use
KNA
as a support.
PARTS REQUIRED:
DORMER ROOF UNIT
7/16 x 35-7/8 x 67-5/8"
(1,1 x 91,1 x 171,8 cm)
x2
1-5/8" (4,1 cm)
x14
KNA
x2
2 x 4 x 52-1/2" (5,1 x 10,2 x 133,3 cm)
TEMPORARY SUPPORT
1
BEGIN
Place
KKA
on floor or other flat surface. Measure and mark KKA at center point
(Fig. A)
.
You have finished assembling your dormer roof unit.
FINISH
5
2
3
4
Place
35-7/8" x 67-7/8"
roof panel on top of
KKA
with the rough side up. Ensure panel is on center mark and
flush along front edge.
Attach
35-7/8" x 67-7/8"
roof panel using (6) 1-5/8" screws in a staggered pattern.
Place second
35-7/8" x 67-7/8"
roof panel on top of
KKA
as shown with the rough side up. Ensure panel is flush
at seam and along front edge. Attach
35-7/8" x 67-7/8"
roof panel using (6) 1-5/8" screws in a staggered pattern.
Attach
GAA
as a temporary panel stabilizer using 1-5/8" screws as shown.
Fig. A
KKA
Flush
Flush
Flush
1-5/8" (4,1 cm) Screws
-Staggered Pattern-
1-5/8" (4,1 cm) Screws
40-1/2"
(102,9 cm)
40-1/2"
(102,9 cm)
KNA
TEMPORARY SUPPORT
GAA
TEMPORARY STABILIZER
