BabyLove Baby Capsule, Manual

Page: 29 / 35

56 57
Accessories Accessories
Canopy (if supplied)
Large sun canopy for protection
whilst out and about.
To Remove Canopy
A. Press button on canopy rod.
B. Detach press stud at the
back of the canopy from
canopy mount.
C. Lift up the canopy from both
sides and remove.
To Replace The Canopy
A. Slide the canopy into the slot
until button pops through the
opening.
B. Pull canopy over back of seat
end and attach press stud.
C. Attach press studs on both
sides of cover.
D. Extend drape from under
canopy visor. Pull out and
attach to magnets on either
side of the baby capsule.
To Store Drape
Roll up drape and store in pocket
under canopy.
IMPORTANT: Do not use the drape or canopy in a vehicle.
Always allow clear observation of the infant when travelling
in a vehicle.
Head Pillow (if supplied)
This head pillow is designed
for additional comfort around
smaller baby’s head. Remove
when outgrown or shoulder
harness has reached top slots.
The pillow is attached to the
comfort insert with press studs
on the back of the pillow.
Padded Insert (if supplied)
- Style may vary
The comfort insert is designed
for additional comfort for smaller
babies. It can be removed once
baby’s shoulders reach the
shoulder height marker to allow
longer use of the capsule.
A. Disconnect buckle and place
insert under shoulder and lap
straps.
B. Feed the crotch strap through
the flap in the padded insert
and re-connect buckle.
Discontinue use if the padded insert
is a tight fit or creates discomfort.