60
61
Front of
vehicle
Front of
vehicle
IF THE CAR IS FITTED WITH A
CHILD RESTRAINT UPPER
IF THE CAR IS NOT FITTED
WITH A CHILD RESTRAINT
UPPER ANCHORAGE POINTS
For Sedans only -
Drill
9mm diameter hole in the
parcel shelf on the centre
line of the seating position
as shown in Fig 3. Before
drilling the hole, check the
underside for accessibility.
Install the attachment
bolt as shown in Fig 2. It is
recommended that this
installation be carried out
by a child restraint fitting
station or licenced motor
mechanic.
Attachment
Bolt
Anchor fitting
Spacer(s)
if required
Vehicle metal
structure
Reinforcing washer
(cone downwards).
Lock washer
Secure nut
UPPER ANCHORAGE FITTINGS FOR
SEDANS ONLY
Vehicle
trim
Fig.2.
Installation Of Vehicle Upper Anchor Point
Installation Of Vehicle Upper Anchor Point
IF THE CAR IS FITTED WITH
A CHILD RESTRAINT UPPER
ANCHORAGE POINT
Locate the upper anchorage
point behind the rear
seating position (Consult
the car owners handbook
for the location of the upper
anchorage point). The upper
anchorage point should be
directly behind and central to
the restraint. Remove thread
plug from the parcel shelf/
floor/roof, etc. and install
attachment bolt and fitting as
shown in Fig 1.
Attachment
Bolt
Lock
washer
Anchor
fitting
Spacer(s)
if required
Vehicle
metal
structure
Vehicle
trim
Fig.1.
UPPER ANCHORAGE FITTING
CAUTION: DO NOT OVERTIGHTEN ATTACHMENT BOLT. OVERTIGHTENING
MAY FRACTURE OR BREAK BOLT. MAXIMUM TORQUE IS 20 Nm(14.75
ft.lb.)
Note: Minimum of five full turns of attachment bolt is required
before tightening force is applied.
Summary of Contents for Baby Capsule
Page 34: ...66 67...
