background image

54

55

Accessories

The following instructions apply to accessories that may be 

supplied with this restraint at point of purchase. The accessories 

are for comfort use only. Use of aftermarket accessories, which 

are accessories not provided with this child restraint, can reduce 

the safety provided by the child restraint and may cause injury 

or death. Always follow the instructions covering the use of 

accessories provided with this child seat and the instructions 

provided with the accessory. If an aftermarket accessory is used 

that is not recommended by Britax

®

, ensure that the accessory is 

compliant with AS/NZS 8005 and is stated as suitable for use with 

this specific child restraint.

Shoulder 

Pads

Crotch 

Pad

Shoulder Pads  

If supplied)

Shoulder Pads give extra comfort 

for your child when using the 

harness. They’re easy to remove 

and it makes washing them a 

breeze - unclip the studs to clean 

them and fit them back onto the 

shoulder harness straps once 

done. 

Crotch Pad

 

(If supplied)

The crotch pad is designed to 

provide extra comfort for baby 

or child and is fitted to the crotch 

buckle straps. It can be removed 

when the buckle is disengaged.

A. 

  To fit the Crotch pad, Feed the 

crotch buckle through the loop 

at the base of the crotch pad 

and pull out the crotch buckle.

B.    

To remove, simply slide the 

crotch pad off the buckle.

ONLY USE BRITAX® SEAT COVERS AND 

ACCESSORIES THAT ARE DESIGNED AND 

TESTED FOR USE WITH THIS PRODUCT.  

      VERY IMPORTANT: 

Only replace the cover with Britax

®

 

supplied replacement cover with 

identical shoulder height markers or a 

replacement cover meeting 

AS/NZS 8005.

Care And Maintenance

Summary of Contents for Baby Capsule




































Reviews: