30
31
Setup - Adjustment Of Handle Position
Setup - Harness Features
The carry handle is designed to rotate in 3 positions as below.
The capsule can be used without the base to convert it to a
rocker. At the base of the handle there are two large buttons
which control the three positions of the handle.
To adjust, press and
hold both carry handle
adjusters and rotate the
handle to the desired
position.
Ensure the handle
is locked in position
securely.
Do not place the Baby Capsule on a table or a work-top where it
could fall off.
Check the Baby Capsule handle is latched properly every time
you pick up the Baby Capsule, lock it onto the base or use it with
a stroller.
IMPORTANT :
1
Carry Position
Rocking Position
Non-Rocking
Position
1. Harness Adjuster Strap
2. Crotch strap and slots
3. Lap strap and slots
4. Shoulder strap and slots
5. Shoulder height marker.
For Low Birth Weight Babies
This Baby Capsule is supplied with harness setup to suit an
average newborn infant birth weight.
Assess the harness fitment and adjust as necessary by following
Setting Up The Harness, see page 34.
However, if your child is of low birth weight or premature then
you may need to reposition the harness to the "low birth weight"
position, as follows:
Move the crotch strap to the inner slot (see page 32), the lap
straps to the inner slots (see page 33) and the shoulder strap
to the nearest slot above the shoulders (see page 35). This will
provide better support for a low birth weight infant.
1
2
3
4
5
Press and hold
Summary of Contents for Baby Capsule
Page 34: ...66 67...
