48
49
Care And Maintenance
Care And Maintenance
Cover (Style May Vary)
The restraint has a flame retardant cover which is removable for
cleaning. Cleaning instructions are on the care label attached to
the cover. If fluffy cover is fitted then washing the cover prior to use
will remove excess fluff.
The cover has been designed to protect your child when seated
in the restraint. Care should be taken if children either eat or drink
while in the restraint as some food or drink products may cause
damage or marking to the cover. Wash or clean immediately.
Do not pull sticky items from covers as the cover may be
damaged - soak in water and gently remove.
To keep your product looking its best, take care when using while
wearing jewelry or other items that could snag.
1.
2.
To Remove The Cover
To remove canopy refer
to page 57.
Remove the harness
straps. See page 35.
Untuck cover from around
front of the seat.
If you still cannot hear a strong
audible click then repeat the
cleaning process several times.
Refit the harness buckle to the
capsule ensuring the red button
facing outwards and the 3-bar
slide is fed through the same slots.
If the harness buckle cannot be
returned to its original working
condition then contact Britax
Customer Service for assistance.
Place the harness buckle under
warm (max. 40 degrees celsius)
running water as shown below. Let
the water run through the mouth
of the buckle for five minutes.
Check the harness buckle is clean
by engaging the harness tongues
and buckle several times until you
hear a click.
Body
3-bar
slide
Cover
1.
2.
3.
Remove the harness buckle from
the underside of the capsule. Pull
each crotch strap 3-bar slide,
turn the 3-bar slide on its side
and push back through the slot.
Summary of Contents for Baby Capsule
Page 34: ...66 67...
