Baby Lock ECS8 Instruction Manual Download

Page: 234 / 271

232

Creating Custom Fonts (Font Creator)

Checking the Created Font Patterns

The sewing order and preview of the font character patterns and the list of created characters can be checked.

Checking and editing the
sewing order

The sewing order for the font character pattern can
be viewed and modified.

Toolbar button:

Click ,

click

Sew

, then

Sewing Order

→

Sewing Order

dialog box similar to the

one shown below appears.

: Click to enlarge each pattern to fill its

frame.

■

Selecting pattern

Select a pattern in the

Sewing Order

dialog

box.

→

The selected pattern has a pink line
around it, and marching lines appear
around the corresponding pattern in the
Design Page.

■

Editing the sewing order

The sewing order can be changed by selecting the
frame containing the pattern that you want to move,
then dragging the frame to the new location. A
vertical red line appears, indicating the position
where the frame is being moved.

An alternative method for moving the frames is by
clicking the buttons at the bottom of the dialog box.

: Click to move the selected pattern to the

beginning of the sewing order.

: Click to move the selected pattern ahead

one position in the sewing order.

: Click to move the selected pattern back

one position in the sewing order.

: Click to move the selected pattern to the

end of the sewing order.

To change the sewing order, click

Previewing the embroidery
pattern

A preview of the Font pattern can be viewed in the
Preview window.

Toolbar button:

Click

, or click

Display

, then

Preview

Window

→

The Preview window appears.

Summary of Contents for ECS8
















































































































































































































































































Search results

Summary of Contents for ECS8

Reviews:

Related manuals for ECS8

Brands by name

Popular brands

Baby Lock ECS8, Instruction Manual

Search results

Summary of Contents for ECS8

Reviews:

Related manuals for ECS8

Brands by name

Popular brands