FUNCTIONS OF THE PHOTOCOPY "A" MODE
In order to change the option at each
function, press the CONT button.
CONT
In order to validate the selected option, push
the TEST button.
TEST
Erase services
This function allows erasing the number of services that the
Tempus III
has at any
moment, and it is mainly used for erasing the services used for tests. By pressing the CONT
button, the display changes to canc / Yes, and this option can be rejected by pressing CONT
again. By pressing TEST, the order indicated on the display at that time is executed.
- 59 -
MEDIOS DE PAGO
O
Y
K
EN
Z
A
Rate 1 (price/service)
Xxxx
The value of the price/service must be programmed at this function.
In order to program the value of the service, press CONT, and the display will show
/ , which indicates that it is ready to program the hundreds and thousands
digits. They are increased by successively pressing the CONT button, or in order to advance
quickly, press and hold the button. By pressing TEST, the display changes to / ,
and it goes to programming the singles and tens digits like the previous digits.
If this function is programmed at zero, the device will not operate and shows the
error message (not programmed) on the display.
Xx00.
00.00
Rate 2 (price/service)
Xxxx
This function is used to program the value of the price/service for
rate 2
. The
programming method is the same as in the preceding function for
rate 1.
Summary of Contents for TEMPUS III
Page 1: ...OY K EN Z A OY K EN Z A Tempus III Technical Manual...
Page 44: ...OY K EN Z A...
Page 55: ...OY K EN Z A...