Azkoyen TEMPUS III, Technical Manual

Page: 15 / 79

6. Description of the Tempus III and replacement parts
6.1. NN6 Selector
The NN6 selector model is responsible for identifying the coins
introduced into the Tempus III . It h as the capacity to admit 15 different
coin models.
The NN6 is responsible for controlling the
Tempus III , together with the control card + power
supply , and it depends on the Tempus for its
operating mode.
WIRING CONNECTIONS
In order for the selector to operate correctly, the
microswitches for selecting the operating mode
must be in the correct position and the connector that
communicates it with the control card + power
supply must be connected correctly:
JP3 Microswitches
SW: Four microswitches that are used to select the operating mode of the device.
Rear with
cover
Rear without
cover
- 11 -
O Y K EN
Z
A
TEMPUS III
MODE SW 2 SW 1 SW 3
SW 4
Timer A ON OFF OFF OFF
Timer B OFF OFF ON ON
Starter OFF ON OFF OFF
Photocopies A OFF OFF ON OFF
Photocopies B OFF OFF OFF ON
The Tempus III must always be turned off when changing the
operating mode.
ON
1 2 3 4
Microswitch
position
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4