Azkoyen TEMPUS III, Technical Manual

Page: 59 / 79

FUNCTIONS OF THE STARTER MODE
In order to change the option at each
function, press the CONT button.
CONT
In order to validate the selected option, push
the TEST button.
TEST
Rate 1 (price/service)
The value in euros to be introduced for a service must be
programmed using this function.
UNPG is the message that appears on the display if 0000 is
programmed as the amount, until it is changed to another amount.
If this function is programmed at zero, the device does not function
and shows an error message (not programmed) until the quantity is
validated.
- 53 - MEDIOS DE PAGO
O Y
K EN
Z
A
Service time
Xxxx
Xxxx.
This function is used to program the duration of the service, which is encompassed
between 1 and 9999 seconds. The programming method is the following: By pressing
CONT, / will appear on the display, which indicates that it is ready to program
the high part of the price (hundreds and thousands units). These can be increased by
successively pressing the CONT button, and it can be advanced rapidly by pressing and
holding the button. Once the high part of the price is selected, press TEST in order to validate
it and go to / , which allows programming the low part (singles and tens digits)
like the previous ones.
Xx.xx
First, 00.00 will appear on the display. The number of
euros is changed by pressing CONT, and by pressing
TEST, the euro cents can be programmed. They are
also changed by pressing CONT and finally validated by
pressing TEST.