- 21 -
O
Y
K
EN
Z
A
TEMPUS III
Connector JP5
CONNECTOR JP5
Pin Comments
1
2
3
Collector output, NPN transistor open
Ground
Exterior input
This is a three-way connector used for possible exterior inputs.
Fuses
1
2
3
4
JP4
5
6
7
8
Power supply card
In order to connect JP4, the Molex 8-way connector is supplied with its corresponding
Molex terminals.
Molex connector
Reference: 03803280-0
Reference: 03900590-0
Molex terminal
Pin 1
Pin 3
It is used exclusively in the
Photocopy "A" and "B"
modes. It is a signal that is
given through pin 1 when the minimum amount of credit is exceeded. This signal ends when
the remaining credit is below the minimum amount of credit. Its use is optional and does not
affect the system operation in any way.
The maximum allowable output intensity on pin 1 is 50 mA.
It serves to change the rate to be applied in the
Photocopy "A" and "B"
modes and
the
Timer "A" and "B"
modes.
By bridging pin 3 to the ground, rate 2 is applied.
By not bridging pin 3, rate 1 is applied.
Summary of Contents for TEMPUS III
Page 1: ...OY K EN Z A OY K EN Z A Tempus III Technical Manual...
Page 44: ...OY K EN Z A...
Page 55: ...OY K EN Z A...