126
If the internal battery is dead, cumulative data will be replaced by the default value.
・
The alarm display screen and the annotation list screen may be lost.
Note: Only the display screens are lost, not the data stored on the CF card.
・
The function that saves the operating status in case of a power outage no longer
operates, and operating parameters return to the defaults
The operating status before a loss of power, such as the type of display screen,
display group number, compression ratio of trend display, auto-switching enable/
disable and starting of the recording command cannot be preserved.
・
The internal clock will be incorrect
If power is lost or turned off while the internal battery is dead, the internal clock will
be behind by the amount of time that the power was off.
・
When low battery voltage is detected, changing the settings may restore them to
default values.
If the power is turned off a few seconds after the settings are changed, the settings
may return to their defaults.
Note: Data stored on the CF card will not be lost. We recommend storing frequently
used settings on the CF card.
If the settings return to the defaults, the alarm message “Set the initial settings” will
be displayed.
Alarm message 1
Alarm message 2
If a problem cannot be solved, contact your dealer or Azbil Corporation. Have the model
No., date code, observations, and other pertinent information at hand.
Data in internal memory can be deleted unexpectedly during repair. Back up data to the
CF card before sending the recorder for repair. Azbil Corporation is not liable for data in
internal memory that is lost or damaged.
If the problem cannot be solved
