94
From the Menu screen, select Network settings
→
FTP client settings to display the following
screen.
■
Server address
• Specify the address of the server to which files will be transferred. If a name (such as xx.co.jp or
xx.com) is specified instead of an IP address, be sure to configure the DNS settings (11.10.2).
■
Directory
• Designate a directory to which files will be written. If the directory does not exist, it will not be
created automatically.
As an example, if the address of the directory on the server is ftp://192.168.254.1/ARF200/DATA,
use “ARF200/DATA” as the directory name.
■
Login user name
• Set the user name for logging in to the FTP server.
■
Login password
• Set the password for logging in to the FTP server.
■
PASV mode
• For transfer in PASV mode, set to ON. In PASV mode, communication is always one-way, from
the client PC to the server. Due to firewall restrictions, etc., some data cannot be transferred in
any mode other than PASV mode.
■
Automated transfer
• For automatic transfer of recorded files when they are replaced with a new one, set to ON.
Otherwise, automated transfer will not occur. To transfer data manually, select the desired file from
the file list on the ARF200’s internal memory screen and transfer it by FTP.
■
Retry mode
• When Retry mode is OFF, if FTP transfer fails three times, the ARF200 will stop attempting the
transfer and display an error message. When Retry mode is ON, the ARF200 will continue to
attempt the transfer until it is successful. However, if th2100 is turned off, files awaiting transfer will
not be sent when it is turned back on.
