5 Assembly in-roof system
In-roof System
Page 40 / 64
EN141217 Axitec GmbH, Otto-Lilienthal-Str. 5, 71034 Böblingen, Germany, +49 (0)7031 62 88-5186
3.
Secure chalk line between both mounting brackets and align..
4.
Secure the remaining mounting brackets on the bottom row in
accordance with the grid plan and aligned.
5.
Check if mounting bracket is fixed properly.
6.
Insert modules.
Preparation of the assembly over the tiles
ATTENTION
Draining at the eaves skirt
Water damage
Through the distance assembly board
–
make sure that the
required minimum slope is guaranteed, so that the water can
flow downward.
5-8:Roof connection at the bottom of the tiles
1
Roof tile
5
Photovoltaic module
2
Eaves skirt
6
Counter slat
3
mounting bracket frames
7
Mounting board 30 x 30
4
fillet sealing strip
20 x 60mm.
8
Batten for tiles
1.
Fasten eaves skirt on the mounting board (7).
2.
Secure the first and last mounting bracket frames (3) of the lowest
row with two half-round head screws (4.5 x 35) on the roof rafters.
3.
Secure chalk line between both mounting brackets and align.
