4 Description of the in-roof system
In-roof System
Page 19 / 64
EN141217 Axitec GmbH, Otto-Lilienthal-Str. 5, 71034 Böblingen, Germany, +49 (0)7031 62 88-5186
To meet the static requirements, a module can with the mounting
bracket glass be anchored additionally in the glass sector. The
required number of mounting brackets for each module edge can
be obtained from the grid plan in accordance with the static re-
quirements (see chapter
Fehler! Verweisquelle konnte nicht
gefunden werden.
). For the protection of the glass, the bracket at
the front is coated with a weather-resistant plastic..
NOTE
Mounting bracket glass is planned as an additional measure and subject
to module size and static requirements.
When using the module > 2400 Pa until
max 5400Pa
at least
least 3
mounting bracket glass are to be used!
Width of bracket:
16.5 mm
Material thickness:
1,5 + 2,0 mm
Material:
Spring steel stainless type 1.4310
Screw type:
Cylinder head 4.5 x 35 VA (2 piece)
PIC 4-4:
Mounting bracket "glass"
Mounting bracket "glass"
