In-roof System
Page 5 / 64
EN141217 Axitec GmbH, Otto-Lilienthal-Str. 5, 71034 Böblingen, Germany, +49 (0)7031 62 88-5186
1.2
Validity
This assembly instructions apply exclusive to the assembly of photovol-
taic modules "AXIblackpremium in-roof system" of the Axitec GmbH.
1.3
Approval (DiBt)
The "AXIblackpremium in-roof system" of the Axitec GmbH currently
enjoys
no
approval by the DiBt (German institute for building technolo-
gy).
1.4
Target group
These installation instructions are intended for installers of photovoltaic
systems and trained personnel that are particularly familiar with the
installation, operation and maintenance of photovoltaic systems.
1.5
Exclusion clause
These instructions apply only to the in-roof product of AXITEC GmbH.
AXITEC GmbH assumes no liability for damages that emerge in that
these instructions were not followed. Please note that the system install-
er accepts all responsibility for the wiring and dimensioning of the sys-
tem and the observance of all necessary safety regulations when laying
out and installing.
These instructions do not establish any liability
against AXITEC GmbH. The AXITEC GmbH is liable only in the
framework of contractual agreements or in the context of accepted guar-
antees.
It accepts no responsibility for the functionality and security of
the modules. Also refer to the instructions for the other system compo-
nents, which can belong to the entire PH system. Where appropriate, the
statics must be drawn up for the entire project. Should your questions
not be answered adequately in this manual, you should first of all con-
tact your system provider.
The Axitec GmbH reserves the right to alter, to amend or to delete this
documentation or parts thereof without previous announcement.
You can find further information on our
homepage
www.axitecsolar.com