5 Assembly in-roof system
In-roof System
Page 41 / 64
EN141217 Axitec GmbH, Otto-Lilienthal-Str. 5, 71034 Böblingen, Germany, +49 (0)7031 62 88-5186
4.
Secure the remaining mounting brackets on the bottom row in
accordance with the grid plan and aligned.
5.
Check if mounting bracket is fixed properly.
6.
Attach fillet sealing strip (4).
7.
Insert modules.
5.4.1.1
Assemble photovoltaic modules
ATTENTION
Incorrect screw type!
Damage to the mounting bracket and maintaining the static values
required power transmission can not be guaranteed.
Use only cylinder head screws 4,5*35 (countersunk screws are
not approved / certified).
ATTENTION
Incorrect mounting direction!
Observe the mounting direction: The installation is only
possible from bottom to top.
Because of the lateral interworking of the frame parts lay the
modules only from right to left.
NOTE
The modules can also be mounted in columns so that the roof
remains accessible for the mounting of further rows.
