background image

Unirac Code-Compliant Installation Man

ual

Unirac welcomes input concerning the accuracy and user-friendliness of this publication. Please write to 

[email protected].

Pub 090924-1ii

September 2009 

© 2009 by Unirac, Inc. 

All rights reserved.

p

L26

s%!%%q'"2

Installation Manual 601.2

 

Summary of Contents for RapidRac G10

Page 1: ...ual Unirac welcomes input concerning the accuracy and user friendliness of this publication Please write to publications unirac com Pub 090924 1ii September 2009 2009 by Unirac Inc All rights reserved p L2 6 s q 2 Installation Manual 601 2 ...

Page 2: ... 3 4 5 6 3 2 4 5 1 2 Tools required for assembly 1 Installer responsibility The installer is solely responsible for Complying with all applicable local or national building codes including any that may supersede this manual Ensuring that Unirac and other products are appropriate for the particular installation and the installation environment Ensuring that the roof its rafters connections and othe...

Page 3: ...d flange nuts on all four connections points using WEEB 9 5 on frame holes facing in towards the array Note Make sure to use a piece of cardboard to protect the module from the surface of the roof Bay Frames Step 3 Lower module with module brackets between rows of bay frames Connect using hex bolts and washers on all six connections points Pressed nuts have been attached to the inside of brackets t...

Page 4: ...ial contingent or incidental damages arising out of the use of the Product by Purchaser under any circumstances If within the specified Warranty periods the Product shall be reasonably proven to be defective then Unirac shall repair or replace the defective Product or any part thereof in Unirac s sole discretion Such repair or replacement shall completely satisfy and discharge all of Unirac s liabi...

Reviews: