Axis 70 User Manual Download Page 59

Page: 59 / 175

User’s Manual

Configuring the Document Server

Creating and

Editing E-mail

Destinations

E-mail destinations allow the users to send scanned images to e-mail
addresses using the SMTP protocol.

Follow the instructions below to create new or edit existing e-mail
destinations.

AXIS 7000

File Destination New >>

Creates a new file destination.

Printer Destination New >>

Creates a new printer destination.

URL for E-mail >>

Defines the storage location for images sent as hyperlinks to e-mail des-
tinations.

AXIS

70/70U/7000

E-mail Subjects >>

Specifies the text to be displayed in the subject field when sending to
e-mail destinations.

Note: US ASCII characters only.

Destination Defaults >>

Displays the default parameters for each destination, e.g. the associated
profile for a particular destination, the transfer type, etc.

Note: Editing the default settings causes all destinations using the default
value to be changed automatically.

Quick Destination

Enter specific permanent destinations to be accessible through the F9
key on the keyboard

External Destinations

Displays the external destinations. Destinations are displayed using the
same syntax as an external address book stored on an FTP server
(see Network Settings | Detailed View)

Remove All Destinations

Deletes all destinations from table.

Product

Button

Summary of Contents for 70
















































































































































































Search results

Summary of Contents for 70

Reviews:

Brands by name

Popular brands

Axis 70, User Manual

Search results

Summary of Contents for 70

Reviews:

Brands by name

Popular brands