manualshive.com logo in svg

Axis 70, User Manual

Share
Download
Axis 70 User Manual Download Page 22

 

Basic Installation

 

 User’s Manual

 

22

 

AXIS Network

Product CD

The AXIS Network Product CD provides an easy-to-use electronic 
catalog, that includes Axis product software, utilities software, white 

papers, user documents, technical notes etc. It can be used within all of 

the supported Axis computing environments. Document Server does 
not require any additional software installation from the AXIS 

Network Product CD.

You can view the contents of the AXIS Network Product CD via Adobe 

Reader or HTML interface. All documents presented on the CD are in 

PDF format.

Notes:

Connecting Scanners and Digital Copiers

Important!

Connecting the AXIS 7000 / AXIS 70 to your scanner device:

1.

Switch off the scanner device and disconnect the Document 

Server’s external power supply.

2.

Connect the SCSI cable to the SCSI connector on the Document 

Server.

3.

Connect the SCSI cable to the scanner device. The Document Server 

uses a built-in SCSI terminator. Note that the scanner device must 

also be terminated properly. Refer to the documentation supplied 
with your scanner device.

• You can download the Acrobat Reader from the AXIS Network Product CD or from the 

Adobe Web site at www.adobe.com

• All of the software and information provided on the AXIS Network Product CD is also 

available from the Axis website at http://www.axis.com.

• Check that the power supply provided with your Document Server is marked with the cor-

rect mains voltage.

• Make sure the scanner device is switched off and the Document Server power supply is 

disconnected. The SCSI bus may become damaged if you connect or disconnect units 
when power is on. (AXIS 7000 and AXIS 70)

Summary of Contents for 70
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands