Axis 70 User Manual Download Page 165

Page: 165 / 175

User’s Manual

Technical Specifications

165

Technical Specifications

Supported Systems

Systems supporting TCP/IP, Line Printer Daemon (LPD), Hypertext
Transfer Protocol (HTTP) client (Web browser), and at least one of

these protocols:

•

(Document Server) Simple Mail Transfer Protocol (SMTP) server

•

(AXIS 7000) File Transfer Protocol (FTP) server

Supported

Web Browsers

•

Netscape Navigator 4.0 or higher

•

Microsoft Internet Explorer 4.0 or higher

•

HTTP 1.0+ and HTML 3.0+ compatible Web browsers

Supported

Protocols

All models

- HTTP, IP, FTP, SMTP, TCP, ARP, RARP, BOOTP, DHCP,

ICMP, SNMP, UDP, LDAP, NTP, WINS, SMB

AXIS 7000 only

- LPD, Reverse Telnet, SLP

Supported Devices

If supported, the Document Server automatically senses the brand and

model of the attached scanner device, without any user intervention.
Scanner devices with built-in compression provide optimum

performance.

Supported scanners and digital copiers:

Avision,

Bell+Howell, Canon, Epson, Fujitsu, Gestetner, Hewlett Packard,

Infotec, Kodak, Lanier, Nashuatec, Océ, Rex Rotary, Ricoh, Savin, Sharp,
UMAX

For a detailed list of supported scanners and digital copiers, check the

Document Server support pages at

http://www.axis.com

or contact

your local dealer.

Device Connection

SCSI-2 (AXIS 70 / AXIS 7000)

USB 1.1 (AXIS 70U)

Supported Printers

AXIS 7000

- TCP/IP with Raw TCP or LPD printing supported.

Summary of Contents for 70
















































































































































































Search results

Summary of Contents for 70

Reviews:

Brands by name

Popular brands

Axis 70, User Manual

Search results

Summary of Contents for 70

Reviews:

Brands by name

Popular brands