Axis 70 User Manual Download Page 14

Page: 14 / 175

Physical Description

User’s Manual

The Front Panel

The front panel indicators show the status of the Document Server. The

function of each indicator is described below.

Status Indicator

The Status indicator flashes during startup and remains lit when the
Document Server is ready for use. If the status indicator turns off, this

may indicate an error.

Busy Indicator

The Busy indicator turns on when the Document Server is allocated for

use and remains on during the scanning process.

Network Indicator

The tri-colored network indicator flashes:

Power Indicator

The Power indicator is normally on while power is applied. If the

indicator remains off or flashes, this indicates a problem with the
Document Server or its power supply

Note:

Power Indicator

Network Indicator

Status Indicator

Busy Indicator

Yellow

indicating network activity on a 10MB Ethernet network

Green

indicating network activity on a 100MB Fast Ethernet network

Red

indicating that the unit is not correctly connected to the network

When the Document Server is idle: the Power indicator should be on, the Network
indicator should flash randomly, the Busy indicator should be off and the Status indicator
should be permanently lit.

Summary of Contents for 70
















































































































































































Search results

Summary of Contents for 70

Reviews:

Brands by name

Popular brands

Axis 70, User Manual

Search results

Summary of Contents for 70

Reviews:

Brands by name

Popular brands