manualshive.com logo in svg

Axis 70, User Manual

Share
Download
Axis 70 User Manual Download Page 115

 

User’s Manual

Meta Information

115

1.

The following prompt will appear on the message display when the 

Add/Send

 key has been pressed. The user is prompted to enter the 

information and then press 

Enter

. The star indicates that this is 

required Meta Information and that the user cannot scan without 
entering the requested information. 

If the entered information is invalid the following display will be shown. 
The user must press 

Enter

 and try again to be able to scan.

2.

The user is prompted to enter the name of the document and then 
press 

Enter

. The star indicates that this is required Meta Information 

and that the user can not scan and send a document without entering 

the requested information.

3.

The user is prompted to enter the name of the person who issued the 

document. This information is not required and can be ignored by 
pressing 

Menu

.

Note:

4.

The user is prompted to enter the version number of the document. 

This information is not required and can be ignored by pressing 

Menu

.

Doc Id No:

.

 

 *

Wrong Id!
abcdef

Doc Name: 

 

.

*

Doc Issuer:

The 

Menu

 button scrolls through the list of Meta Information. The 

Enter

 button 

validates the entered information against the pattern defined in the XML DD file.

Doc Version:

Summary of Contents for 70
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands