Basic Installation
User’s Manual
28
Using a PC
keyboard
Connecting a PC compatible keyboard directly to the Mini-DIN
connector of your Document Server provides a quick and convenient
method for managing the unit and setting the IP address during
system start up. Follow the procedures below to set the IP address from
the keyboard.
Note:
1.
The following commands are for the setup of the IP parameters at
start-up only. If the keyboard is not already connected, make sure
that the Document Server power supply is disconnected before
connecting the keyboard to the Mini-DIN connector located on the
rear panel.
Connect the Document Server power supply and Press
Tab
when
the following message appears:
2.
After a few seconds the following message will appear:
3.
Press
Enter
to edit the IP address:
4.
Use the following keys to enter the IP address:
• Use the numeric keys to enter the digits.
• Press
Left
or
Right
arrow to edit the previous or next digit.
• Press
Backspace
to erase the last entered digit.
• Press
Space
to move to the next three-digit group.
• Press
Home
or
End
to go to the first or last three-digit group.
• Press
Enter
to save and exit.
• Press
Esc
to cancel.
The instructions above also apply for editing the router address and
subnet mask setting.
The Administrator can disallow this function from the Web-based Administration pages.
For further details refer to “
User Options
” on page 41.
AXIS 7000
Version 2.24
IP address:
000.000.000.000
Edit IP address:
000.000.000.000
