2022-07-27 | Technical improvements, changes in design, printing- and other errors reserved.
7
1.4.2.
MK 8-0xN | MK 12-0xN
MK 8-0xN | MK 12-0xN can receive DVB-S/S2/S2X.
1.5.
Demodulation of the data stream
The selection of the frequency and the demodulation of the data stream are both done in the tuner.
If needed, the programs from the data flow of the demodulated transponder can be filtered (Remux mode).
Thanks to the Cross Multiplex Mode, FTA programs (Free to Air) can be filtered from the data flow of several
tuners for a common output channel and be bundled again.
The prepared data flow is passed on to the modulators.
1.6.
Output/modulators
1.6.1.
MK 8-0x | MK 16-0x | MK 8-0xN | MK 12-0xN
MK 8-0x and MK 8-0xN have eight output modulators
MK 12-0xN have 12 output modulators
MK 16-0x have 16 output modulators
The modulators can be set to any output channel (DVB-C = S2…K87 | DVB-T = S2…K69). Due to the
possibility of setting a frequency offset, any centre frequency in the output frequency range can be configured
beyond the stored channel table.
1.6.2.
MK 8-2x
MK 8-2x have eight output modulators
If the output modulation is set to FFT 32K or 32Kext mode, the number of output modulators is reduced to
four.
The modulators can be set to any output channel (DVB-T2 = S2…K69). Due to the possibility of setting a
frequency offset, any centre frequency in the output frequency range can be configured beyond the stored
channel table.
