Operation instructions | MK 8-0x | MK 16-0x | MK 8-2x | MK 8-0xN | MK 12-0xN
36
2022-07-27 | Technical improvements, changes in design, printing- and other errors reserved.
Under
Input
, select one of the available input streams.
Under
In PID
, enter an unreferenced PID.
Select the output
Modulator
.
Under
Out PID
, enter the output PID. The output PID can be the same or different from the input PID.
Click on the
green plus sign
next to the line.
The entered data are inserted.
If necessary, enter additional non-referenced PIDs.
The same input PID can be added to multiple outputs if needed. Output PID value can be set separately for
each output. In the example below, PID 7496 from the tuner 1 is added to the output modulators 1, 2 an 3.
Click SAVE after completing the entries.
This saves the entries in the headend.
Editing or deleting entries
Click on the
pencil icon
to the right of the line.
You can now change
Input
,
In PID
,
Modulator
and
Out PID
Then click on the
green check mark
.
The changes are accepted.
To delete, click on the
trashcan icon
to the right of the line.
The line is deleted.
Click SAVE.
This changes the entries in the headend.
