Operation instructions | MK 8-0x | MK 16-0x | MK 8-2x | MK 8-0xN | MK 12-0xN
30
2022-07-27 | Technical improvements, changes in design, printing- and other errors reserved.
4.2.3.
Choosing input mode
For each tuner, an input mode can be selected.
•
Default
The programs can be assigned to the respective modulators in Remux mode or distributed to different
modulators in cross-multiplex mode
•
Select all
Each program is activated for the modulator. If the option is activated, then no settings can be made in
the columns LCN, Decrypt etc.
•
Transmodulator
The programs and information (PIDs, NIT etc.) are transmitted 1:1 from the tuner to the modulator,
nothing is changed.
Important:
In the input mode Transmodulator, no changes can be made to the programs, such as LCN,
program name, etc.
4.2.4.
LCN (Logical Channel Numbering)
The LCN function enables channel allocation for the station scan of the TV devices. The TV device must support
the LCN function.
•
The TV devices must support the LCN function.
•
The maximum number of LCNs per modulator is 63.
•
Different LCN standards can be set with the Region selection field. The selected LCN standard must match
the connected devices for LCN to work.
•
An LCN can only be entered for programs assigned to a modulator.
Click on the
LCN
column for the corresponding program.
Enter the LCN with the keyboard or increase / decrease the LCN with the arrow buttons right of the
number.
Enter a separate LCN for each desired program.
To clear the LCN, enter 0 in the LCN column.
Click SAVE CHANGES.
The numbers of the channels are saved.
