Operation instructions | MK 8-0x | MK 16-0x | MK 8-2x | MK 8-0xN | MK 12-0xN
24
2022-07-27 | Technical improvements, changes in design, printing- and other errors reserved.
If multistreams are to be received, then the
PLS mode
must be set to root or gold. In addition, the correct
Stream ID
(three digits) and the
PLS code
(six digits) must be entered.
After all settings have been made,
4.1.3.
Bit error rate
The BIT ERROR RATE is shown. The amount of bit errors for the last 1,000,000 transferred bits is calculated.
4.1.4.
Found programs
After a successful station scanning, the radio and TV stations are shown in the area FOUND PROGRAMS. The
table contains information about the Program Name, the Type and the Encryption.
4.1.5.
Deactivating a tuner
If a tuner is not needed, it can be deactivated. The tuner then no longer searches for stations. In phase 2 and in
the station list, which can be printed as PDF, no programs are displayed for the tuner.
Click TUNER 1…8/12/16 to select one tuner.
The
Tuner enabled
check box is set at the factory.
To deactivate a tuner, deselect the
Tuner enabled
check box.
Then click SAVE AND SCAN.
This deactivates the tuner.
