Configuring 3.x Reader Firmware
© 1999, AXCESS
TM
Inc.
750.001.003
Revised June 1999
37
Communicating with the Reader via HyperTerminal
Step 1:
On the computer’s desktop, click the
Start
button. The
Start menu will appear (Figure 16).
Step 2:
From the Start menu, select
Programs
,
Accessories
,
Communications
,
HyperTerminal.
Figure 16 Accessing HyperTerminal from the Start Menu
Step 3:
In the
Explorer
window that appears, double-click the
Hypertrm.exe
icon. This launches the HyperTerminal
application.
Step 4:
In the
Connection Description
dialog box that appears,
enter any name for the connection in the
Name
field, and
select the first icon in the
Icon
selection box. Click the
OK
button.
Step 5:
In the
Connect To
dialog box that appears, select the com
port to which the Reader is connected from the
Connect
Using
drop-down list. The other options will gray out. Click
the
OK
button.
Step 6:
In the
Com Properties
dialog box that appears, enter the
following information depending on the Reader type to
which you are connecting:
Serial Reader and Wiegand Reader:
Bits per second (Baud)
4800
Data Bits
8
Parity
None
Stop Bits
1
Flow Control
None
FTT Reader:
Bits per second (Baud)
2400