General Installation Information
10
750.001.003
Revised June 1999
© 1999 AXCESS
TM
Inc.
Hand Tools, Equipment and Materials
IMPORTANT!
You need to have the following materials on hand to
ensure successful installation of the NT132 system.
These items
are
not
supplied with the NT132 System.
Required
•
RG-58/U coaxial cable with 50-ohm impedance (nominal), solid
copper center conductor, 55% tinned copper braid or better,
100% foil shield coverage (for example, Belden 9310). The
length required for your installation will vary.
•
Eight 3-Piece Crimp Type Male BNC Connectors (for example,
Amphenol 31-320). Connectors can be damaged during
crimping. Having more than eight on hand is recommended.
•
Tape
measure
•
Power drill and bits
•
Diagonal
cutters
•
Phillips and flathead screwdrivers, including a very small flathead
screwdriver
•
4 # 10 Anchors, Plastic (for mounting the Reader in drywall or
mortar)
•
4 # 10 Self threading screws
•
4 # 10 Washers
•
4 Screws for mounting the ATU
•
Wire
strippers
•
Three blade rotary coaxial cable stripper
•
BNC
crimpers
•
Multimeter
•
Wire to connect to third-party devices (i.e., camera, door strike,
etc.) as specified by the manufacturers.
•
A computer to configure the Reader ID numbers
•
A terminal communication program
•
A straight-through (one-to-one) DB9 male to female serial cable.
DO NOT use a null-modem cable or a null-modem adapter.