AVT MAGIC THipPro Lite, Configuration Manual

Page: 72 / 158

▪
SEND ALL TRAPS AT SYSTEM STARTUP: Enable
this option to send all traps when the MAGIC
THipPro Lite has finished booting.
▪
SEND TRAPS IMMEDIATELY AFTER ENABLING:
Enable to send a trap immediately after it was
enabled in the configuration.
▪
CATEGORY A-D ALIAS: Each Trap may be
assigned to a category. Enter strings to describe
the categories. The strings can be read by the
network management station.
▪
ALARM TRAPS: All available traps are listed in this
table.
▪
Select all traps which should be sent to the network
management station.
▪
Click into the CATEGORY column to assign a trap to
a category.
▪
There are four categories. To decrease the number
of traps to send, assign several alarms to a
category and select only the category trap at the
end of the list.
▪
Find more information about the alarms in the
SYSTEM MONITOR section of this document.
▪
Additional Traps:
▪ AUTHENTICATION FAILURE: A request used an
unknown community string.
▪ COLD START: The SNMP agent is reinitialising.
▪
Note: Find the MIB files in the MIB folder inside the
installation directory of the MAGIC THipPro Lite
PC software.
SNMP (3)
74