AVT MAGIC THipPro Lite, Configuration Manual

Page: 63 / 158

▪
Configure the parameters for connecting the
MAGIC THipPro Lite to a DHD core on the DHD
AUDIO MATRIX page.
▪
The MAGIC THipPro Lite supports the DHD-ECP
(External Control Protocol) to interact with DHD
mixing consoles by sending and receiving
commands and status information via DHD
SetLogic.
▪
The MAGIC THipPro Lite can connect to up to 2
DHD cores.
▪
The MAGIC THipPro Lite always tries to connect to
the primary IP address of the DHD core. If that is
not available it will try to connect to the
redundancy IP address of the DHD core.
▪
ACTIVATE DHD AUDIO MATRIX CONTROL: Enable
the DHD communication protocol.
▪
LAN INTERFACE: Select the LAN interface of the
MAGIC THipPro Lite which connects to the DHD
cores.
▪
REDUNDANCY LAN INTERFACE: Select the LAN
interface of the MAGIC THipPro Lite which
connects to the Redundancy IP Address of the
DHD cores.
▪ TCP/IP RECONNECT TIME: Specifies the time
interval between TCP connection requests to a
DHD core in seconds. The range is 1
– 255
seconds. (default: 10 seconds)
▪
DHD CORE: Enter up to 2 DHD cores in the table.
▪ IP ADDRESS: Enter the IP address of the DHD
core.
▪
REDUNDANCY IP ADDRESS: Enter the redundancy
IP address of the DHD core.
▪
TCP/IP PORT: Enter the port of the DHD-ECP
(External Control Protocol) of the DHD core.
▪
Find more details about controlling the MAGIC
THipPro Lite via DHD SetLogic in the Signalling
and Control with DHD SetLogic document
available in the download section of our website.
DHD AUDIO MATRIX (2)
65