AVT MAGIC THipPro Lite, Configuration Manual

Page: 69 / 158

▪
Configure the parameters for the stream quality
indication on the PC software clients on the
STREAM QUALITY MEASUREMENT configuration
page.
▪ The stream quality of a received audio stream
during a telephone connection is displayed by a
little LED next to the level meters in the PC
software.
▪
⬤
: The stream quality is good
▪
⬤
: The stream quality is acceptable
▪
⬤
: The stream quality is bad
▪
MEASUREMENT INTERVAL: The MAGIC THipPro
Lite counts the number of lost packet and stores
the maximum jitter that appeared within that time
interval. The first indication of stream quality
after a call is established can be displayed when
the first measurement interval is over. A short
interval leads to faster results.
▪
The thresholds for the status LEDs can be
configured under QUALITY LED STATUS.
▪
PACKET LOSS >: Define the number of packet losses
within the measurement interval that will make the
LED switch to the respective quality level.
▪
JITTER >: Define the maximum jitter within the
measurement interval that will make the LED
switch to the respective quality level.
Stream Quality Measurement (2)
71