AVT MAGIC THipPro Lite, Configuration Manual

Page: 129 / 158

▪
AUDIO OUTPUT: All available audio outputs are
listed here. Select an audio output, the Primary
Sound Driver or the Default Communication
Device. (Check the sound settings of the
operating system to see which audio interfaces
are set as Primary Sound Driver and Default
Communication Device.)
▪
PLAY TEST SIGNAL ON AUDIO OUTPUT: If enabled
the PC software generates an audio signal and
plays it on the audio output if the Pretalk stream
from the MAGIC THipPro Lite is received.
▪
RECORD CALLER AND SCREENER TO A STEREO
AUDIO FILE: Enable this option to record the audio
signals of the caller and the user of the PC
software to separate channels of a stereo audio
file.
If disabled, only the audio signal of the caller is
recorded to a mono audio file.
▪
AUTOMATICALLY START RECORDING WHEN
SWITCHING TO PRETALK: Enable this option to
automatically record any caller in Pretalk.
Recording stops automatically when a call is
switched to Hold or On Air or when the call is
dropped.
▪
EXTERNAL AUDIO EDITOR: Define an external
audio editor.
To open a recording in the audio editor, display
the Recordings list, click on a recording with the
right mouse button and click EDIT
PRETALK Streaming (3)
131