AVT MAGIC THipPro Lite, Configuration Manual

Page: 35 / 158

▪
Configure the basic parameters for connecting to
the telephone network on the LINE INTERFACE
page.
▪
LINE MODE: Specifies the type of telephone
network the MAGIC THipPro Lite is connected to.
▪ VOIP (LAN/SIP): Voice over IP provides digital audio
transmission over IP networks. The audio quality is
automatically negotiated at call setup. The MAGIC
THipPro Lite supports two algorithms:
▪
G.711 (3.4 kHz audio bandwidth)
▪
G.722 (HD-Voice, 7 kHz audio bandwidth with HD-
Voice software upgrade).
▪
For incoming calls, the MAGIC THipPro Lite always
uses the best algorithm that is supported by the
calling station.
▪
POTS: Plain Old Telephone Service provides
analogue audio transmission with 3.1 kHz audio
bandwidth. Requires the POTS hardware upgrade
which consists of one or two modules providing
four channels each.
▪ POTS & VOIP (LAN/SIP): Mix POTS and VoIP
channels. The line mode must be specified for each
channel separately in the LINE CONFIGURATION
below. The number of VoIP and POTS channels does
not add up.
▪
POTS GATEWAY 4/8 LINES: Allows you to connect
the THipPro Lite via predefined VoIP accounts to a
POTS gateway with up to 8 analogue telephone
lines. The POTS gateway must be purchased from
AVT.
▪
DROP NOT ANSWERED INCOMING/OUTGOING
CALLS AFTER 90 SECONDS: The THipPro
automatically ends unanswered calls after 90
seconds.
▪
PSEUDO DIAL TONES ON CURRENT AUDIO
INTERFACE: Enable to hear the dialling of
numbers on the current audio line (Pretalk, On Air,
PhonerSet, …). The tones do not correspond to the
actual number dialled to protect the privacy of
the called party.
Line Interface (2)
37