background image

I N S T A L L

 

A T I O N   G U I D E  

for the

 

SB-F-150

-

SCDBL/12TW3

SKU# 94661

2009-Up Ford F-150 SuperCrew & 2017-Up SuperDuty Crew Cab

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.  

With proper installation, your new vehicle-specific enclosed subwoofer system  

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your 

authorized JL Audio dealer. The installation professionals employed by your 

dealer have the necessary tools and experience to disassemble and reassemble 

your vehicle properly.  If you prefer to perform your own installation, please read 

this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely  

vital that the Stealthbox

®

 be properly mounted to the vehicle  

according to these instructions.  Failure to mount the enclosure  

properly presents two problems:  
1)  The sub-bass performance will suffer due to the movement of the

enclosure caused by the force exerted by the woofer(s).

2)  A loose enclosure presents a serious safety hazard in the event of a

collision or sudden deceleration.

INSTALLATION

DIFFICULTY:

ESTIMATED TIME:

1 HOUR

Enclosure Type:

  Sealed

Driver Type:

  12TW3-D8

Nominal Impedance:

  2 ohms

Continuous Power Handling:

  800 watts (RMS method)

Continued on Next Page 

2

5

OUT  

OF

SB-F-150SCDBL/12TW3  INSTR_SKU# 011506

Summary of Contents for Stealthbox SB-F-150-SCDBL/12TW3






Reviews: