Page 4 • JL Audio, Inc., 2018
Continued on Next Page
S T E P 8
Using a 1/2” drill bit, carefully drill through the
impression in the Wax Square.
Repeat for the opposite side.
Remove the Wax Squares from the vehicle.
S T E P 7
Carefully tilt the enclosure forward, as shown,
ensuring the Wax Squares remain affixed to the
floor.
S T E P 6
Remove the adhesive from a Wax Square. Lift
up on the side of the enclosure, and affix the
Wax Square to the floor directly under the 3/8 -
16 x 2-1/2” Set Screw installed in
Step 4
.
Repeat for the opposite side.
Firmly press down on the enclosure so that the
3/8 - 16 x 2-1/2” Set Screws leave an impression
in the Wax Squares.
S T E P 5
Place the Stealthbox into position, as shown.
The enclosure should be centered in the
vehicle and pushed rearward until flush against
the rear seat bracket bolts.
S T E P 4
Thread a 3/8 - 16 x 2-1/2” Set Screw into the
threaded insert on the bottom of the
enclosure, leaving approximately 1/2” exposed.
Repeat for the opposite side.
S T E P 3
Place the Stealthbox into the vehicle, as shown.
S T E P 2
Fold the seat bottoms up.
S T E P 1
Empty the rear seat area.
SB-F-150SCDBL/12TW3 INSTR_SKU# 011506