AVT MAGIC THipPro Lite, Configuration Manual

Page: 128 / 158

▪
PRETALK STREAMING
▪
The audio signal of an audio input of the PC is
streamed to the MAGIC THipPro Lite by the PC
software.
▪ The MAGIC THipPro Lite streams the audio signal of
the caller to the PC.
▪
The PC software outputs the audio signal of the
caller to an audio interface of the PC.
▪
A Pretalk stream is either fixed, where there is a
permanent stream between the PC and the MAGIC
THipPro Lite, or dynamic, where the PC software
requests a stream from the MAGIC THipPro Lite
when needed.
▪
The audio signals of the caller and the user can also
be recorded by the PC software.
▪
The RECORD button on the PC software is only
available when at least one call is in Pretalk und the
client uses Pretalk Streaming.
▪
AUDIO INPUT: All available audio inputs are listed
here. Select an audio input, the Primary Sound
Capture Driver or the Default Communication
Device. (Check the sound settings of the
operating system to see which audio interfaces
are set as Primary Sound Capture Driver and
Default Communication Device.)
▪
STREAM TEST SIGNAL TO MAGIC THIPPRO LITE: If
enabled, the PC software uses the clock provided
by the audio interface to generate an audio signal
which is streamed to the MAGIC THipPro Lite.
There must be a telephone line in pretalk to hear
the audio signal at the caller’s end.
PRETALK Streaming (2)
130