AVT MAGIC THipPro Lite, Configuration Manual

Page: 51 / 158

▪
Set the parameters of the analogue and digital
audio interfaces on the AUDIO INTERFACE page.
▪
AES/EBU INTERFACE - CLOCK SOURCE OF
DIGITAL OUTPUT: The MAGIC THipPro Lite has
sample rate converters only on the AES/EBU
inputs. The AES/EBU outputs run on the system’s
audio clock. Systems connected to the MAGIC
THipPro Lite via AES/EBU may be required to have
sample rate converters on their inputs. This
setting specifies the clock to which the system's
audio clock is synchronized. Some of the options
may be unavailable depending on modules
equipped, line mode or audio over IP settings.
▪
INTERNAL: Synchronize to the clean internal clock .
▪
INTERNAL / DANTE CLOCK: Synchronize to Dante
clock if a Dante module is equipped and configured,
otherwise the internal clock is used.
▪
INTERNAL / RAVENNA CLOCK: Synchronize to
Ravenna clock if a Ravenna module is equipped and
configured, otherwise the internal clock is used.
▪
INTERNAL / PTP CLOCK: Synchronize to the AES67
clock if AES67 is enabled, otherwise the internal
clock is used.
▪
EXTERNAL / CLOCK 1: Synchronize to the external
clock supplied through the CLOCK 1 socket on the
rear panel of MAGIC THipPro Lite.
▪
RECOVERED / AES/EBU CLOCK: Synchronize to the
clock of the audio signal supplied through the first
AES/EBU input where a signal is detected.
Audio Interface (2)
53