Avolites Pearl Expert Titan, Operator'S Manual

Page: 137 / 149

15 . Changes in version 2.0 - Page 137
PearlExpertTitan_Man_v2-0.doc 23/09/2009 12:16:00
Recording empty chase or cue list: Recording a cue list or chase
with no steps would cause the console to behave strangely with those
playbacks. The rest of the desk would continue to run normally due to
the error recovery system.
Shape generator, no fixtures warning: Sometimes the shape
generator would warn you that no fixtures where selected even if there
were.
Delete shape stops running shapes: If you deleted a shape which
contained attributes in a live shape on a playback then the live shape
would stop running.
Visualiser not always opening: If the visualiser is closed manually
using the mouse then [Show Visualiser] option in the view menu would
not always work.
Unable to turn off highlight in Run mode: If you have highlight
enabled and change to run mode you have no way to turn off highlight.
This has been changed so you can now turn off highlight in run mode.
Re-patch ignores the warn before you patch user setting: When
re-patching a fixture it would ask you if you wanted to park a
conflicting fixture even if you had the "Warn Before Parking Fixtures"
option set to never.
Grand master applying fixture overlap: When you changed the
grand master level it would fade the playbacks using any overlap set in
the times. It now simply masters the intensity without overlap.
Playbacks would sometimes disconnect: If you had a playback
connected and then used the wheels to edit an attribute value. The
connected view for the playback would not return when you pressed
clear.
Chase will not run with 0% xFade and reversed: If you have a
chase with 0% xFade and reversed then it would not run.
User number box incorrectly appearing in Set Legend: If you
were setting the legend for a cue and you pressed the [Legend]
softkey, the user number entry would appear even though you can not
set a user number for cues.
Warning icon in set legend menu: In the set legend menu a warning
icon would appear on User Number whenever you first selected an
item. The icon now only appears if the user number is changed to an
invalid value.
Delete Fixture From Patch Only: You can now only delete fixtures by
pressing [Patch] [Delete] this prevents accidental deletion of fixtures
and consequential loss of programming.
Show HUD sometimes only showed part: Occasionally pressing
Show HUD would only show the playback section. It will now show all
the sections.
Fixture Patch View could get outdated: When repatching and
parking fixtures in some cases the fixture patch view could show the old
DMX addresses not the current one. This has been resolved.
Flash locked Mode 2 cues: Pressing the flash button on a mode 2 cue
whilst the cue was fired on the fader would cause it not to return to its
start position when the fader was pulled back. You can now flash and
swop a mode 2 cue and it will return to the position it had when it was
first fired.