Avolites Pearl Expert Titan, Operator'S Manual

Page: 14 / 149

Page 14 – 1 . Setting up the console
PearlExpertTitan_Man_v2-0.doc 23/09/2009 12:16:00
The main controls
• The Preset Faders are used to control individual dimmer channels
and fixture intensities. Cues and chases can also be stored on these
faders. The 2 buttons below the faders are used to select and flash
whatever is stored on the fader. Each fader and buttons is called a
“Handle”.
• The Mode select keyswitch selects Programming, Run or System
modes of operation.
• The Page select rollers let you select different pages of playbacks,
and you can write the playback names on the rollers so you know
what’s in them. There are 2 rollers each controlling 10 playback faders
• The Master faders control the overall output of the various parts of
the console. You will normally have these set at Full.
• The Playback faders and flash buttons are used to play back cues or
chases you have programmed, when you are running a show.
• The Main display is the nerve centre of the console and shows you
what is going on. The display can show various screens of information.
• The Control wheels are used to set control values on the fixtures,
and to set chase speeds and fades.
Preset faders / handles
Mode select keyswitch
Main display
Master faders
Attribute
select buttons
Playback faders &
flash buttons
Playback page
select rollers
Control
wheels
Menu
softkeys
Command
buttons
Numeric
keypad and
controls
Fixture page
buttons